Are You Ready To Get High Quality Penumatic Rivet Nut Tool?
Want to use a stable and inexpensive Air rivet nut gun?
China Pneumatic Rivet Nut Gun factory offers you high quality Pneumatic Rivet Nut Gun directly.
A912 Pneumatic Rivet Nut Tool
| Specifications | |
| Pull Force | >19.1KN |
| Stroke | 7mm |
| Standard Pressure | 0.55MPa |
| Used/Air Pressure | 0.5-0.7MPa |
| Air Consumption | 4.6 litres |
| Motor Speed | 2000 RPM |
| Vibration | 2.5 m/s² |
| Noise Level | <75dB(A) |
| Weight | 2.2Kg |
| (L*H*W/Size) | 280×250×115mm |
| Rivet Nut Material | All Material |
| Rivet Nut Specifications | M3-M12(1/8″ – 1/2″) |
Sufficient Stock - Fast Response to Your Needs
Rivmate has a 3,000 square meter warehouse. Inside it is stored a large number of high quality A912 Rivet Nut Gun.If you want to buy pneumatic rivet nut gun, you can get it quickly.
Of course, we offer other services as well.
- OEM
- One Year Warranty
- Replacement of Parts
Advantage:
1, One tool to complete the work of nuts from #8-32，#10-32，#10-24, 1/4-20, 5/16-18, 3/8-16,M3,M4, M5 , M6 , M8 , M10, M12,13 sizes nuts. Nuts including stainless steel, steel, aluminum, copper and other materials can be applied.
2. Fully automatic tool, from installing the nut, to pulling the nut, and pushing out, only one key is needed.
3. Very durable, the nut can be pulled more than 1.8 million times in its entire life. (excluding wear parts)
4. If you are a professional and need to deal with all kinds of heavy-duty work, you need one.
Tips:
1. It’s best to do some testing on scrap to adjust the stroke to get the desired nuts result. Start with a short stroke setting and work your way up until the nut is properly tightened. When the nut pull stroke is set too long, you may strip the threads on the mandrel.
2. The direction of pulling the nut should be perpendicular to the plate, so as not to damage the pull rod and get a good pulling nut effect.
Note:
1. During replays nose-piece, for safety, be sure to turn off the air source first .
2. After installing the gun head, please test the air pressure and tools to be normal before starting the formal operation.
Safety User Guide：
In order to enable you to use this tool correctly and not to be harmed at work, please read the following items carefully and strictly implement them before use.
1. The maximum air pressure used cannot exceed 7bar, or the maximum pressure required in the instructions.
2. When not in use, changing tool accessories or performing maintenance, please turn off the air source and disconnect the tool from the air source connector.
3. When operating the tool, do not wear gloves, shin guards, or loose clothing, and keep a certain distance from the body and the tool.
4. Do not directly touch the rotating shaft to avoid injury to your hands or other parts of the body by tools. Wear gloves to protect your hands during operation.
5. Non-professionals cannot modify the tool structure by themselves, or replace parts from other manufacturers.
6. Do not leave excessively long gas lines in walkways or work areas, which could cause staff to trip and slip.
Reply within 12 Hours
Send us a message if you have any questions or request a quote. We will be back to you ASAP!
Location
CONTACT PERSON SEARCH
One Year Warranty - You Don't Have to Worry about Damage!
When you start using Rivmate’s pneumatic rivet nut gun, you won’t have to worry about damage for a year. We provide you with a one year warranty. After one year of use, even if there is a problem with the pneumatic rivet nut gun, we can provide you with parts to replace it!So why not start using Rivmate’s pneumatic rivet nut gun from now on?