Hemlock Rivets
Your single source for wholesale Hemlock rivets, offering factory-direct structural blind fastening.
Hemlock Rivets for Mechanical Locking Applications
The Hemlock Rivet is a structural blind rivet designed to achieve high-strength, vibration-resistant permanent connections in applications where installation is only possible from one side. Unlike conventional blind rivets that rely on core pin fracture, the Hemlock Rivet mechanically locks the core pin within the rivet body after installation, creating a stable, non-retractable locking state.
Mechanical Locking Mechanism Explained
The core principle of the Hemlock Rivet lies in mechanical locking, rather than relying on friction retention after the mandrel breaks. During installation, the mandrel is drawn into the locking groove within the rivet body and is permanently secured within it by the deformed locking structure.
This locking occurs within a pre-engineered structural zone inside the rivet body, not through indirect constraints created by the tail’s forming process. This design ensures that after the mandrel breaks, it will not spring back or loosen due to vibration, impact, or load cycling, fundamentally eliminating the risk of mandrel loss common in standard blind rivets.
WHY USE IT
Hemlock Rivets Product Features & Advantages
Mechanical Locking Design
The mandrel is permanently secured within the rivet body via an internal mechanical locking mechanism, eliminating the risk of loosening under vibration or cyclic loading.
High Shear and Tensile Strength
The mandrel contributes to load-bearing capacity, providing the riveted joint with superior shear and tensile strength. This makes it suitable for medium-to-high load structural connections.
Superior Vibration Resistance
Mechanical locking relies on no friction retention, maintaining stable connections under prolonged vibration or impact conditions.
Consistent Long-Term Performance
The locking mechanism does not degrade over time, ensuring consistent connection performance throughout the entire service life.
Blind-Side Structural Fastening
Enables structural-grade connections in single-side installation scenarios, meeting assembly requirements for enclosed structures or inaccessible backsides.
Reduced Failure and Maintenance Risk
Effectively minimizes common failure modes such as core pin loss and connection loosening, reducing rework and long-term maintenance costs.
Structural Performance
Structural Performance Data
I. Tensile Strength
Hemlock Rivets demonstrate exceptional tensile load capacity in common specifications. For instance, certain models with a 1/4″ (≈ 6.4 mm) diameter exhibit typical tensile strengths reaching approximately 2090 lbs (about 9300 N), ensuring more stable connections under axial tensile forces.
In engineering practice, this level of tensile strength far exceeds that of most standard blind rivets, which rely solely on tail-end deformation friction to maintain the connection.
II. Shear Strength
Hemlock Rivets also demonstrate exceptional shear load capacity. Using the aforementioned 1/4″ diameter as an example, their shear strength reaches approximately 3820 lbs (≈ 17 000 N). This metric indicates superior resistance to shear failure under lateral loads.
This strength stems from its internal locking mechanism and larger blind-side bearing surface, which distribute shear loads more evenly and reinforce the joint.
Hemlock Rivets vs Standard Blind Rivets
Hemlock Rivets vs Standard Blind Rivets: Structural Strength
| Comparison Item | Hemlock Rivets (Structural Locking) | Standard Blind Rivets |
|---|---|---|
| Locking Method | Internal mechanical lock with mandrel permanently retained in the rivet body | Relies on blind-side deformation and frictional holding |
| Vibration Resistance | High; mechanical locking prevents mandrel loosening | Low; mandrel may loosen or be lost under vibration |
| Long-Term Stability | High; mechanical lock does not degrade over time | Moderate; friction-based retention degrades over time |
| Failure Risk | Low; reliable under vibration and cyclic loading | High; prone to failure under vibration and load variation |
The core advantage of Hemlock Rivets stems from their internal mechanical locking mechanism, rather than the tail friction or strain retention relied upon by conventional blind rivets.
This locking method enables Hemlock Rivets to maintain secure fastening without core-shank loosening or joint failure under high shear, heavy loads, and vibrational environments. Standard blind rivets, whose locking relies on tail friction, are more prone to failure, loosening, or performance degradation under vibration or load cycling.
Therefore, when a connection point requires structural strength, long-term stability, and vibration resistance, Hemlock Rivets offer a more reliable choice than conventional blind rivets.
Have More Questions？
Contact our engineers for reliable product data and engineering advice.
Hemlock RIVETS INSTALLATION
Installation Guidelines of Hemlock Structural Blind Rivets
Special Tools Required
Hemlock Rivets can be installed using standard pneumatic or electric rivet guns without requiring specialized locking tools. The key factor is the rivet gun’s consistent pull force output, not the tool model itself.
Installation Consistency Requirements
To ensure proper formation of the mechanical locking structure, maintain perpendicular alignment between the rivet gun and the workpiece during installation. In batch assembly, consistent pulling force directly impacts locking quality and forms the foundation for long-term reliability.
APPLICATIONS
Typical Applications of Hemlock Rivets
Vibration-Resistant Assembly
Suitable for connection points subjected to prolonged vibration or impact loads, effectively preventing core rod loosening and connection failure.
Structural Sheet Metal Joining
Used for sheet metal structures with specific shear and tensile strength requirements, ensuring long-term structural stability.
Vehicle and Engineering Equipment Frames
Suitable for frame and support structure connections in commercial vehicles, construction machinery, and other applications where regular maintenance is impractical.
Safety-Critical Joints
Applied to critical junctions where failure could pose safety risks, reducing the probability of connection loosening.
Single-Access Load-Bearing Structures
Provides reliable solutions for scenarios requiring structural integrity despite installation access from only one side.
Frequently Cycled Load Connections
Suitable for areas subjected to repeated loading or fatigue conditions, maintaining connection performance without degradation over time.
Frequently Asked Questions About Hemlock Rivets
10 Autonomous Key Processes Ensure Fasteners' Quality
- Raw Material Inspection
- Cold Forming
- Thread Rolling
- Head Treatment
- Assembly
- Laser Selecting
- Warehouse of Semi-finished products
- Packaging
- Warehouse of finished Products
- Logistics
The key process of fastener manufacturing are made independently and intelligently, and each fastenerion process is closely monitored and managed to ensure the quality of each fastener.
13 Full Fastener testing and design verification equipment
- Spectrometer
- Image Mapping
- Surface Profiler
- Thickness measuring meter,Concentricity tester
- Measuring Prohector
- Computer Tensile & Shearing Set
- Vickers Hardness Tester
- Metallurgical Microscope
- Film Thickness Teaster
- Salt Spray Test Box
- Torsque Testing Machine
- Riveting Test
- Ejector Machine
From raw materials to finished fasteners, from design to manufacturing have reliable testing equipment and complete verification process, our laboratory has been approved by Volkswagen,Tesla, SAIC GAC,BAIC etc.