Whatsapp: +86 18962304392

Email: manufacture@world-rivet.com

Leading Rivets Manufacturer in China

Rivet Nut Tool vs Rivet Gun: What's the Difference?

Rivmate Fastener

Rivmate Fastener

Top Rivet and Rivet Nut Manufacturer in China

Table of Contents

Rivet Guns vs Air Hammer

Rivet nut tool and rivet gun are both commonly used tools in industry. So do you know the difference between a rivet nut tool and a rivet gun? This guide will be centered around the rivet nut tool vs rivet gun.

Table of Contents

What Are Rivet Nut Tool?

The Rivet Nut Tool is the best solution for installing rivet nuts. Rivet nuts provide a threaded connection point for sheet metal joints, allowing more possibilities for product composition.

Rivet nuts are often used in industrial applications with great frequency. This is why rivet nut guns can be widely used. Rivet nut guns greatly improve the efficiency of installing rivet nuts and save a lot of labor costs.

Use Air Rivet Nut Tool

What Are Rivet Guns?

In practice, riveting rivets is usually done with a rivet gun. The advent of the rivet gun has made the installation of rivets a comforting process. Often, the entire installation process can be accomplished with just the push of a switch.

Pneumatic rivet guns are ideal for mass production. And pneumatic rivet guns provide consistent installation quality for riveted joints. This is especially important during assembly line installations.

Best Pneumatic Rivet Gun

Is a Rivnut Tool the Same as a Rivet Tool?

The Rivet Nut Tool and the Rivet Tool are two different tools that are used for different purposes, although they are similar in the way they operate. The following are the differences between the two:

Rivet Nut Tool: The Rivet Nut is typically used to provide an internal thread in a thin plate or material for screwing in bolts or screws. The Rivet Nut Gun is the tool that accomplishes this process.

The Rivet Nut Tool inserts the rivet nut into a pre-drilled hole and then pulls the nut through the tool, causing the tail to expand and create a strong threaded joint.

Rivet Nut Guns are used frequently in applications that require the creation of threaded holes in thin materials, such as automotive repair, electronic equipment housings, metal framing, etc.

Rivet Tool: Used to install rivets, also known as spigots or core pullers, the Rivet Tool completes the riveted joint by pulling on the mandrel of the rivet, causing the end of the rivet to expand and hold the material in place.

Rivet guns are a necessity in situations where permanent connections are required, such as automotive, construction, and appliance assembly.

Differences

Rivet Nut Tool creates a joint with internal threads suitable for screwing in bolts or screws.

The Rivet Tool creates a permanent connection that cannot be easily removed after riveting.

Both are similar in appearance and use, but have different functions and uses.

A large quantity of rivets

Contact Our Engineers Today

We provide you with high quality rivets, including customized services.

Can You Use a Rivet Gun for Rivnuts?

This is not acceptable! An ordinary rivet gun should not be used to rivet a rivet nut. Although the Rivet Gun and the Rivet Nut Tool operate on similar principles, they are designed for different purposes and cannot be used interchangeably.

So why can’t they be used? Here are a few of the main reasons:

1. Different Principles of Operation

Rivet Gun : is used to install rivets, which are firmly fixed to two pieces of material by pulling the mandrel to expand the tail of the rivet. Once the riveting is complete, the rivet is a permanent connection and cannot be easily removed.

Rivet Nut Tool: Used to install rivet nuts. Rivet nuts have threaded holes, and after they are secured to the material by the tool, the user can screw a bolt or screw into the nut to form a removable threaded connection.

2. The Object of Riveting is Different

Rivet guns are specifically designed to install rivets. Riveting nuts, on the other hand, requires the tool to apply rotational tension in order to expand and create a threaded hole in the material. Regular rivet guns do not have the rotational capability to properly expand a rivet nut.

3. The Tool Design is Different

A rivet gun secures the rivet by pulling on the mandrel, but it does not have enough clamping or rotational tension to properly install a rivet nut.

A rivet nut tool, on the other hand, is specifically designed for rivet nut installation, providing the pulling force and expanding the nut properly to form a threaded connection.

Rivmate Pneumatci Riveting Tool

If you need to install rivet nuts, you must use a specialized rivet nut tool, not a common rivet gun. Each tool is designed to match its specific use and using them interchangeably can result in riveting failure or damage to the material.

Rivet Nut Tool vs Rivet Gun: What's the Difference?

In the table below I have listed the main differences between the rivet nut tool vs rivet gun.

Comparison PointRivet Nut ToolRivet Gun
Primary UseInstalling rivet nuts, provides internal threads for bolts or screwsInstalling rivets, used for permanent material fastening
Working PrincipleUses pulling and rotation to expand the rivet nut and secure materialsPulls the rivet mandrel to expand the tail and secure materials
Typical ApplicationsCreating threaded holes, such as in automotive repair, electronicsRiveting applications in automotive manufacturing, construction, appliance assembly
Tool DesignProvides pulling force and rotation to create threaded connectionsProvides pulling force to expand rivets and secure materials
Tool TypesManual, pneumatic, electric, etc.Manual, pneumatic, electric, etc.
Fastening ObjectRivet nuts (with threads)Rivets (solid or hollow)
Ease of OperationRelatively simple, mainly for creating threaded holesStraightforward, mainly for permanent fastening
MaintenanceRegular lubrication and cleaning, easy to maintainRequires cleaning of jaws and nozzle, keeping internal lubrication
CostGenerally more expensive than rivet guns, especially pneumatic or electric versionsCosts vary depending on model, ranging from low to high
Common Industry ApplicationsAutomotive, electronics, appliance installationConstruction, aerospace, shipbuilding, machinery manufacturing
Tool FlexibilitySuitable for various nut sizes, adapts to different diameters with interchangeable partsAccommodates various rivet sizes with interchangeable nozzles
User DifficultyEasy to operate, minimal adjustments neededEasy to operate, ideal for high-volume industrial use

Conclusion

By reading this guide, I’m sure you have a clear understanding of the differences between the rivet nut tool vs rivet gun.Rivet nut tool and rivet gun are both tools for fixing thinset. But they rivet different objects, so these two types of tools are also not to be mixed.

You need to choose the right tool for your project needs.

Order Riveting Tool from Rivmate

Are you looking for a high quality rivet nut gun or rivet gun for your project? Do you want to solve all your tool sourcing needs at once?Rivmate is one of the top 3 pop rivet manufacturer and riveting tool manufacturer in China.You can get high quality riveting tool at factory price.Of course,we also provide OEM,ODM service.

If you want to buy riveting tool, please contact us!

Order High Quality Rivet Gun

Submit Your Sourcing Request

Submit Your Sourcing Request

First order over $5,000 free riveting tools

Order over $5000 Free riveting tools for you